Who it is for
A shop, cafe, salon, or office on UniFi that offers guest WiFi to customers. When you lock the door at night, that guest network keeps broadcasting to the parking lot, the apartment upstairs, and anyone sitting outside. Nobody you are serving needs it then. This guide shows you how to switch the guest network off on a schedule, so it is only on while you are open. Your staff WiFi, cameras, card readers, and alarm stay exactly as they are.
If you do not have a separate guest network yet, start with our guest WiFi guide and come back.
Why bother
- Less exposure. A guest network that is off cannot be used by someone parked outside overnight, and it is not available to anyone trying to guess their way in.
- Fewer surprises on your bill and your bandwidth. Overnight streaming or downloads from strangers on your guest network use your internet connection, and in some cases your data allowance.
- A clean reset each day. Guest devices drop off at closing and reconnect when you open, so yesterday’s customers are not still hanging on.
UniFi has a built-in setting for this called the WiFi Blackout Scheduler. Ubiquiti’s help article describes it as a way to “automatically disable an SSID during specific times of the day or week,” and calls out guest and IoT networks outside business hours as a typical use. Each WiFi network (SSID) gets its own schedule, so turning guest WiFi off does not touch staff WiFi.
What you need
- Admin access to UniFi, either locally or through unifi.ui.com (Site Manager).
- A separate guest WiFi network already set up in UniFi.
- Your real opening hours for each day of the week, including late nights, early deliveries, and weekends.
- A fresh UniFi backup (see our backup guide).
- About 15 minutes, plus a quick check the next morning and evening.
Steps
- Write down when guests actually need WiFi. Start from your posted hours, then add a cushion. If you open at 9 but customers wait in the lobby from 8:45, start guest WiFi at 8:30. If you close at 6 but the last appointment often runs late, keep it on until 7. Note any days you are closed all day.
- Make sure the network you are scheduling is the guest network. In the UniFi Network application, go to Settings > WiFi and look at the list. Confirm which name is the guest network and which is staff. If anything important uses the guest network (a self-check-in tablet, a music player, a lobby TV), move it to the right network first or plan the schedule around it. See our IoT guide for where those devices belong.
- Take a backup of your UniFi settings. It takes a minute and it is your way back if something goes wrong.
- Open the guest network’s advanced settings.
- In Settings > WiFi, click the guest network.
- Find the advanced section. In many versions it is set to Automatic; switch it to Manual so the extra options show.
- Turn on the WiFi Blackout Scheduler.
- Scroll down and turn on WiFi Blackout Scheduler (some versions show it as WiFi Scheduler).
- Read the schedule carefully: you are choosing the times the network is off, not the times it is on. This trips up a lot of people.
- Mark the closed hours for each day. For example, if you are open 8:30 a.m. to 7 p.m. Monday to Saturday and closed Sunday, set Monday through Saturday off from 7 p.m. to 8:30 a.m., and Sunday off all day.
- Apply and double-check. Click Apply Changes. Then open the guest network again and confirm the schedule saved the way you meant it, day by day.
- Check that UniFi has your local time. A schedule is only as good as the clock behind it. Look in UniFi’s system or general settings for the time zone and confirm it matches where your business is. If it is set to another time zone, your guest WiFi will turn off at the wrong hour.
- Test it tonight and tomorrow morning.
- A few minutes after closing time, look at the list of WiFi networks on your phone. The guest network should be gone, while your staff network is still there.
- Check that card readers, cameras, the alarm, and anything else on staff or device networks are still online.
- The next morning, a few minutes after opening time, confirm the guest network is back and a phone can join and load a web page.
- Tell your staff. Let them know guest WiFi now turns off at night. If someone stays late with a customer, they will know why guest WiFi disappeared and who can adjust the schedule.
- Revisit it when your hours change. Holiday hours, summer hours, and special events all need a quick edit. Put a reminder next to wherever you update your posted hours.
Test checklist
- Real opening hours written down for every day, with a cushion.
- Guest and staff networks clearly identified in Settings > WiFi.
- Nothing important depends on the guest network overnight.
- UniFi settings backup taken before changes.
- WiFi Blackout Scheduler on for the guest network only.
- Off times (not on times) set for each day, closed days blocked all day.
- UniFi time zone matches your location.
- After closing: guest network gone, staff network and devices still online.
- After opening: guest network back and working.
- Staff told, and a reminder set to update the schedule when hours change.
Cautions
- Schedule only the guest network. Do not add a blackout schedule to the network your card readers, cameras, alarm, phones, or POS use. Those need to stay on overnight.
- Off means off for everyone on that network. The scheduler turns the network off; it does not pick and choose devices. Anything left on the guest network will drop off at closing time.
- It is not a lock on your access points. The schedule stops the guest network from broadcasting. Your access points keep running for staff and device networks.
- Write down your schedule. Keep a note of the hours you set. If someone turns the scheduler off and on again later, you will want to re-enter it quickly and correctly.
- Late events and early crews. If you host an evening event or a cleaning crew needs guest WiFi, adjust the schedule ahead of time rather than handing out your staff WiFi password.
- Menu names move between UniFi versions. If you cannot find Manual, WiFi Blackout Scheduler, or Apply Changes, use the search box in the UniFi app or check Ubiquiti’s help article above.