Who it is for
A small shop, office, or restaurant on UniFi whose staff WiFi password has not changed in years, or was just shared by someone who has left. You know you should change it. You are also afraid that the moment you do, the card reader, receipt printer, kitchen printer, or cameras will go offline and nobody will know how to reconnect them.
Why this matters
Anyone who has the staff password is on the same network as your point-of-sale and back-office computers. Changing it is the cheapest security fix you have. The risk is not the change itself; it is the devices nobody remembers that are quietly using that password.
What you need
- Admin access to your UniFi Network app (local or through unifi.ui.com).
- A fresh backup (see our UniFi backup guide).
- 30–60 minutes outside business hours for the actual switch.
- Physical access to each fixed device (printers, POS terminals, cameras, smart TVs) and any admin PINs they need.
Steps
1. Make a list of everything on the staff WiFi
- In UniFi Network, open Client Devices (called Clients in some versions).
- Filter or sort by WiFi network name (SSID) so you only see the staff network.
- Write down every device that is not a person’s phone or laptop: card readers, POS tablets, printers, cameras, thermostats, music players, TVs. Give unclear ones a name in UniFi (click the device → rename/alias) so you can spot them later.
- Note which ones can be plugged into a network cable instead. Wired devices do not care about the WiFi password at all.
2. Move what you can to a cable or the right network
- Wire any fixed device that sits near a network jack or switch port, especially the POS and receipt printer.
- If you already have a separate network for devices (see our IoT separation guide), put gadgets there instead of on staff WiFi.
3. Pick the new password and plan the switch
- Use a long passphrase (four or more unrelated words) rather than a short complex one. It is easier to type into a printer keypad.
- Store it in the business password manager or a sealed note with the owner, not in a group text.
- Choose a quiet time: after close, or before open, with at least an hour to spare.
4. Change the password
- Go to Settings → WiFi and open the staff network.
- Change the Password (sometimes labeled Security key or Passphrase). Leave the network name the same so devices only need the new password.
- Save/Apply. Access points push the change in a minute or two, and every device on that network disconnects.
5. Reconnect fixed devices first, in order of importance
- Card readers and POS terminals.
- Receipt and kitchen printers (usually from the printer’s own menu or its setup app).
- Cameras, then everything else on your list.
- Run a test sale and a test print before you leave.
6. Reconnect staff devices and tell the team
- Share the new password in person or through your password manager.
- Remind staff to “forget” the old network on personal phones if they keep asking for the old one.
7. Check for stragglers the next day
- Look at Client Devices again. Anything from your list that is missing is still trying the old password.
- Fix it, then delete the old password from any notes, sticky labels, or the back of the router.
Test checklist
- Backup taken before the change.
- Every non-person device on staff WiFi is listed and named.
- POS and receipt printer wired where possible.
- Test card sale and test print succeeded after the change.
- All listed devices reappear in Client Devices next morning.
- New password stored in one approved place; old one removed from notes and labels.
Cautions
- Do not rename the WiFi network at the same time. Two changes at once doubles the reconnect work.
- Some card readers are managed by your payment provider. If you cannot reach the WiFi screen, call their support before the switch, not during it.
- Do not post the staff password on the wall. If customers need WiFi, give them the guest network.
- If your device and staff networks share one password, this is a good moment to split them.
- Menu names change between UniFi versions. If you cannot find Client Devices or Settings → WiFi, use the search box in the UniFi app, or search the UniFi Help Center for “WiFi password” or “Client Devices” for your version.